BKQPX - SAVIN 9350 DISPERSANT, 887073
- MSDS: BKQPX
- Manufacturer: RICOH CORP
- Product Name: SAVIN 9350 DISPERSANT, 887073
- National Stock Number: 6850-00N016906
Product Identification
Product ID:SAVIN 9350 DISPERSANT, 887073
MSDS Date:10/18/1990
FSC:6850
NIIN:00N016906
MSDS Number: BKQPX
Responsible Party
WEST CALDWELL, NJ 07006
US
Emergency Phone: 800-336-6737
Info Phone: 201-882-2000 800-336-6737
Preparer: KRISTINA SAGE
Cage: 54726
Contractor
Telephone: 800-336-6737
Cage: 54726
Ingredients
HYDROTREATED HEAVY NAPHTHA (ISOPAR)
CAS: 64742-48-9
Fraction By Weight: >99%
ACGIH TLV: 300 PPM (MFR)
RESIN MALEATED POLYMER
Fraction By Weight: <01%
THORO AFTER CONT, BEFORE BREAKS/MEALS, & END OF
RTECS: 9999999ZZ
WATERLESS HAND CLEANERS FOLLOWED BY WASHING WITH
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:LD50:ORAL(RAT)>10MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: SLIGHT CONJ IRRIT. SKIN:
MILD IRRIT UNDER CONDITIONS OF EXCESSIVE EXPOS. (PRIMARY IRRITATION
INDEX = 1.75). INHAL: NO UNTOWARD EFFECTS. INGEST: PRACTICALLY
NON-TOXIC. CHRONIC: HEALTH STUD IES HAVE SHOWN THAT MANY PETROLEUM
HYDROCARBONS & (SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: SYNTHETIC LUBRICANTS POSE PTNL HUMAN
HLTH RISKS WHICH MAY VARY FROM PERSON TO PERSON. AS A PREC, EXPOS
TO LIQ, VAP, MIST OR FUMES SHOULD BE MINIMIZED. SYMP OF EXPOS: HIGH
VAP CONC (> APPROX 1000PPM) ARE IRRITATIVE TO EYES & RESP TRACT,
MAY CAUSE HDCH & DIZZ, ARE ANESTHETIC, & MAY HAVE OTHER CNS
EFFECTS.
First Aid
First Aid:EYES: IF SPLASHED, FLUSH WITH CLEAR WATER FOR AT LEAST 15 MIN
OR UNTIL IRRITATION SUBSIDES. SKIN: REMOVE ANY CONTAMINATED
CLOTHING AND CLEANSE SKIN THOROUGHLY WITH WATERLESS HAND CLEANER
FOLLOWED BY W ASHING WITH SOAP AND WATER. INHAL: IF OVERCOME BY
VAPORS, REMOVE FROM EXPOSURE AND CALL PHYSICIAN IMMED. INGEST: DO
NOT INDUCE VOMIT; CALL PHYSICIAN IMMED.
Fire Fighting
Flash Point Method:TCC
Flash Point:109F,43C
Lower Limits:0.7%
Upper Limits:6.5%
Extinguishing Media:FOAM, WATER SPRAY, DRY CHEMICALS, OR CARBON
DIOXIDE.
Fire Fighting Procedures:IF LEAK/SPILL HAS IGNITED, USE STD FIRE PROC
FOR PETRO BASED LIQ. USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
MINIMIZE BRTHG GAS/VAP/FUMES/DECOMP PROD.
Unusual Fire/Explosion Hazard:DO NOT STORE OR MIX WITH STRONG OXIDIZING
AGENTS.
Accidental Release
Spill Release Procedures:SHUT OFF/ELIM ALL IGNIT SOURCES. KEEP PEOPLE
AWAY. RECOVER FREE PROD. APPLY SAND/EARTH/OTHER SUITABLE ABSORB TO
SPILL AREA. MINIMIZE BRTHG VAP/SKIN CONT. VENT CONFINED SPACES.
OPEN ALL WINDOW/DOORS. K EEP PROD OUT OF SEWERS & WATERCOURSES
BY(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, OPEN FLAME &
SPARKS. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:EMPTY CONTAINERS RETAIN RESIDUE (LIQ/VAP) AND CAN BE
DANGEROUS. TO AVOID THE RISK OF EXPLOSION, DO NOT PRESSURE OR
EXPOSE EMPTY CONTAINERS TO HEAT, FLAME, SPARKS, OR OTHER SOURCES OF
IGNITION.
Exposure Controls
Respiratory Protection:NONE NEEDED UNDER NORMAL CONDITIONS OF USE.
Ventilation:MECHANICAL: GENERAL VENTILATION ADEQUATE.
Protective Gloves:NONE NEEDED UNDER NORMAL CONDITIONS.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE NEEDED UNDER NORMAL CONDITIONS OF USE.
Work Hygienic Practices:MINIMIZE BRTHG VAP/MIST. AVOID PRLNG/RPTD CONT
W/SKIN. REMOVE CONTAMD CLTHG; LAUNDER/DRY-CLEAN BEFORE REUSE. (SUPP
DATA)
Supplemental Safety and Health
SPILL PROC: DIKING/IMPOUNDING. ADVISE AUTH IF PROD HAS ENTERED OR MAY
ENTER SEWERS/WATERCOURSES, OR EXTENSIVE LAND AREAS. ASSURE
CONFORMITY W/APPLIC GOVT REGS. CONTINUE TO OBSERVE PREC FOR VOLAT,
COMB UST VAP FROM ABSORB MATLS. HYGENIC PRAC: REMOVE CONTAMD SHOES
& THORO CLEAN & DRY BEFORE REUSE. CLEANSE SKIN (ING 3)
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:161F,72C
Vapor Pres:<10 (@26C)
Vapor Density:>5
Spec Gravity:0.75 (15C)
Evaporation Rate & Reference:0.3(BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE. <0.1%
Appearance and Odor:CLEAR WATER WHITE LIQUID, FAINT PETROLEUM
HYDROCARBON ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZERS SUCH HAS LIQUID CHLORINE OR CONC.
0*2.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE AND OTHER
DECOMPOSITION PRODUCTS IN THE CASE OF INCOMPLETE COMBUSTION.
Disposal
Waste Disposal Methods:WASTE LIQ SHOULD BE DISPOSED OF IN AN
ENVIRONMENTAL SAFE MANNER & IN ACCORDANCE WITH GOVERNMENTAL
REGULATIONS. DISPOSAL REGULATIONS VARY FROM LOCALITY TO LOCALITY,
THEREFORE, CONSULT YOUR LOCAL, STATE & FED AUTH TO DETERMINE
PROPER METHOD OF DISP.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.